POWERTWIST DRIVE
SPECIALTY BELTS - 3L, A/4L, B/5L, C
POWERTWIST DRIVE® link belting is a perfect candidate for drives that have no take-up adjustment capability or for use as an emergency replacement belt. It can be assembled by hand and rolled onto the drive just like a bicycle chain. PowerTwist Drive link belting has the same cross-section dimensions as traditional rubber belts and can be installed on existing sheaves with no changes in setup.
Features/Advantages
- High performance polyurethane/polyester composite
- Reinforced with multiple plies of strong but flexible fabric
- Oil, chemical and heat resistant
- Industry standard horsepower ratings
- Fast and easy installation
- RoHS compliant
Applications
Emergency replacement belt
Sizes
3L, A/4L, B/5L, and C cross sections in 30 meter rolls
Downloads
| Part Number | Top Width (inches) | Thickness (inches) | Length (feet) | Length (mm) | Weight (lbs.) |
|---|---|---|---|---|---|
| 3LTWIST | 3/8" | 7/32" | 98 foot roll | 30 meter roll | 11.5 |
| ATWIST | 1/2" | 11/32" | 98 foot roll | 30 meter roll | 5.5 |
| BTWIST | 21/32" | 7/16" | 98 foot roll | 30 meter roll | 8.9 |
| CTWIST | 7/8" | 9/16" | 98 foot roll | 30 meter roll | 32.5 |
PowerTwist Drive® is a registered trademark of Fenner U.S.